Series Ethernet Radio Modem ARM-SE

The ARM-SE is compatible with all of the ARM range and enables, from a serial port or an Ethernet network, get access to other radio modems (distant I/O, serial port, Ethernet). Configurable on an embedded web page it is possible to use it as a radio bridge between many Ethernet or RS232/RS485 (PLC for example) equipments. Thanks to the ModbusTCP embedded server, it can be a Modbus gateway between Modbus TCP and Modbus RTU.

Category:

Description

The ARM-SE is compatible with all of the ARM range and enables, from a serial port or an Ethernet network, get access to other radio modems (distant I/O, serial port, Ethernet). Configurable on an embedded web page it is possible to use it as a radio bridge between many Ethernet or RS232/RS485 (PLC for example) equipments. Thanks to the ModbusTCP embedded server, it can be a Modbus gateway between Modbus TCP and Modbus RTU.

Interfaces :

  • Ethernet (RJ45) 10/100 BaseT
  • RS232/RS485 (SUBD9)
  • Radio (SMA) 868MHz/27dBm max or 433MHz/10dBm max
  • Power suply (2 wires) 10-30VCC / 6W

Functioning mode :

  • Transparent mode, serial or Ethernet
  • ModbusRTU mode
  • Modbus TCP to Modbus RTU gateway
  • Mirror mode with extension cards X8800-X4404-X4440
  • Compatible with the ACW and ARM range

Configuration, update :

  • By embedded web page or AT commands
  • Settings saved in Flash
  • Firmware update by Ethernet
  • Configuration and test mode in local and distant
  • 3 Dip-switch behind the product for RS485 + 1 to put in test mode

Additional information

Fréquence

,

Documentation

Langue Datasheet User Guide Quick Installation Guide Note Application
Français
English