Video Tutorials

ACW Range - Commissioning Videos

Discover our ATIM video tutorials to install, configure, and monitor your IoT/M2M solutions.

These guides help you get started with the ACW sensor range, configure your sensors (commissioning, installation best practices, maintenance), and leverage your data according to your LPWAN network (LoRaWAN, Sigfox, LTE-M / NB-IoT).

Open an ACW box

Practical video showing how to open the enclosure, access the USB port and connection terminal block, as well as maintenance procedures (battery replacement, checks before returning to service).

ACW/THAQ : Indoor air quality sensor

Configuration and startup of the IAQ sensor: typical measurements (indoor air quality), recommended installation, data usage, and alert triggering based on your defined thresholds.

ACW/WL : Liquid leak detection sensor

Configuration and startup of the liquid leak detection sensor: product startup and configuration in real conditions, on-site installation.

ACW/MR4 : Remote meter reading

Configuration and startup of the meter reading sensor: opening the enclosure and accessing the connection terminal block, product startup and configuration.

ACW/TST: LPWAN network tester

Configuration and startup of the LPWAN tester to verify LoRaWAN / Sigfox coverage (depending on the version).

ACW/CTS : Standalone current sensor

Configuration and startup of the ACW-CTS sensor: installation on an electrical cable, commissioning and verification of current and temperature measurements, followed by configuration of data reporting and energy monitoring alerts.