ACW-MSC-N2
Power meter
for Enerclip CTs
Modbus and relay output

RS485
ethernet
Ethernet
Self-powered via the voltage inputs of the measured circuit

Temperature humidity sensor Sigfox – LoRa | ACW-THX-v2

The Enerclip MSC-N2 measurement module allows for complete measurement of electrical values for a three-phase circuit or three single-phase circuits thanks to its three inputs for Enerclip current transformers and its ability to measure voltage, current, power, energy, harmonics, and associated values.

Thanks to its compact DIN-rail format (1 module) and its power supply drawn directly from the measured circuit, the MSC-N2 integrates easily into electrical cabinets without the need for an external battery.

A programmable relay and digital inputs are integrated: if a configured threshold is exceeded or an input status changes, actions or alerts can be triggered immediately.

Measurements are transmitted via industrial Modbus RTU communication over RS485, and configuration is performed remotely or locally using supervision software or via the optional display.

Compatible with supervision and electrical value analysis software, data visualization, remote module parameterization, and relay configuration according to predefined thresholds are made possible in just a few clicks.

See also
Multi-Input Modular Power Meter

Description
MEASUREMENT RANGE Measurement of 1 three-phase circuit or 3 single-phase circuits via 3 inputs for Enerclip current transformers and direct voltage measurement or via associated transformers.
ACCURACY Class 0.5S for active energy (compliant with industrial electrical measurement standards).
AUTONOMY* Self-powered via the measured circuit (no autonomous battery).
BATTERY No internal battery — power supply via measured electrical circuit.
HOUSING Compact 1-module wide housing, clips onto standard DIN rail in electrical cabinets.
MODES Instantaneous and aggregated measurements of electrical values (energy, demand, extremes, harmonics up to 63rd order), programmable relay, digital inputs for circuit status or pulse counters.
CONFIGURATION Modbus RTU communication via RS485, configurable parameters, relay threshold programming, and supervision/programming possible via software or optional display.
PLUG & PLAY Installation in less than 10 minutes

*a product’s battery life depends on several external factors (ambient temperature and humidity, transmission frequency, network quality, etc.)

Additional information
Technology

References

Documentation
Documentation available in French only

MSC-N2-FR

Description and documentation
MEASUREMENT RANGE Measurement of 1 three-phase circuit or 3 single-phase circuits via 3 inputs for Enerclip current transformers and direct voltage measurement or via associated transformers.
ACCURACY Class 0.5S for active energy (compliant with industrial electrical measurement standards).
AUTONOMY* Self-powered via the measured circuit (no autonomous battery).
BATTERY No internal battery — power supply via measured electrical circuit.
HOUSING Compact 1-module wide housing, clips onto standard DIN rail in electrical cabinets.
MODES Instantaneous and aggregated measurements of electrical values (energy, demand, extremes, harmonics up to 63rd order), programmable relay, digital inputs for circuit status or pulse counters.
CONFIGURATION Modbus RTU communication via RS485, configurable parameters, relay threshold programming, and supervision/programming possible via software or optional display.
PLUG & PLAY Installation in less than 10 minutes

*a product’s battery life depends on several external factors (ambient temperature and humidity, transmission frequency, network quality, etc.)

Documentation available in French only

MSC-N2-FR

Additional information
Technology

References

Video

For any information

Our team will respond to your requests as soon as possible.

For any information

Our team will take care of your requests as soon as possible.